Share some NetApp Certified Support Engineer (NCSE) NS0-191 exam questions and answers below.
Click the Exhibit tab. The exhibit shows an overview of a customer's network design. The customer is experiencing ping loss. As part of the troubleshooting process, you receive output by using the if grp status command from the node shell. In this scenario, what is the customer's problem?
A. The interface group on the controller is not using the default type, causing a connection mismatch with the switch.
B. Link aggregation is not active on the switch, despite being in the design.
C. Virtual interface (VIF) is deprecated in clustered Data ONTAP because the interface group is not working as it should.
D. Virtual LANs (VLANs) are not used, which causes the interfaces to be overloaded.
Answer: A
Click the Exhibit tab.
The customer configured an SVM called “NewSVM” for NFS, configured the volume, “vol_nfs”, mounted at “/vol_nfs”, and set up NFSv3 as shown in the exhibit. However, if they try to mount from the client with IP address 192.168.10.10, they receive a “permission denied” error. In this scenario, which action will solve the error condition?
A. Add a rule to the default export policy to Include the -clientmatch 192.168.10.0/24 parameter.
B. Stop and start NewSVM.
C. Associate a correct export policy to the root volume (/) of NewSVM.
D. Configure the default route for NewSVM correctly.
Answer: A
Your customer has a 2-node cluster with two FAS2554 controllers running clustered Data ONTAP 8.3.You want to upgrade non-disruptively to clustered Data ONTAP 8.3.1 using the rolling-upgrade method. Which two operations would you perform before issuing the A storage failover takeover – of node NodeA- command? (Choose two.)
A. Upgrade the service processor of all nodes.
B. Migrate all LIFs used for iSCSI and FC away from NodeA.
C. Change the default boot image to the new image.
D. Install the new software image on all nodes.
Answer: AD
You are preparing to implement a storage virtual machine (SVM) in a SAN configuration. You need to eliminate single points of failure and enable the system to survive component failures.According to NetApp, what is the recommended minimum number of paths per LUN connecting to each node being used by an SVM in a cluster?
A. 4
B. 2
C. 1
D. 3
Answer: C
An administrator on a clustered Data ONTAP 8.3.1 system created a FlexClone of a volume containing a LUN, but the new LUN Is offline and cannot be seen by the client.
In this scenario, which two actions will solve the problem? (Choose two.)
A. The LUN must be mapped to an initiator group.
B. The new volume must be split from the parent volume before the LUN can be used.
C. The LUN must be renamed to be different from the parent LUN.
D. The LUN needs to be brought online.
Answer: CD
Click the Exhibit tab.
Your customer's MetroCluster controllers have generated AutoSupport notifications with a "DISK REDUNDANCY FAILED" message. Referring to the exhibit, which component is causing the problem?
A. the SAN switch site3_3
B. the SAN switch sitel_2
C. the ATTO bridges on site3
D. the inter-switch link (ISL) between sit el and site3
Answer: A
You log in to a SnapMirror destination to review the system.
Which scanner would you expect to see running?
A. active bitmap real management
B. container block reclamation
C. blocks used summary update
D. deswizzler
Answer: D
Click the Exhibit tab.
The customer configured an SVM called ¡°NewSVM¡± for NFS, configured the volume, ¡°vol_nfs¡±, mounted at ¡°/vol_nfs¡±, and set up NFSv3 as shown in the exhibit. However, if they try to mount from the client with IP address 192.168.10.10, they receive a ¡°permission denied¡± error.
In this scenario, which action will solve the error condition?
A. Add a rule to the default export policy to Include the -clientmatch 192.168.10.0/24 parameter.
B. Stop and start NewSVM.
C. Associate a correct export policy to the root volume (/) of NewSVM.
D. Configure the default route for NewSVM correctly.
Answer: B
Click the Exhibit tab.
Your customer's MetroCluster controllers have generated AutoSupport notifications with a "DISK REDUNDANCY FAILED" message.
Referring to the exhibit, which component is causing the problem?
A. the SAN switch site3_3
B. the SAN switch sitel_2
C. the ATTO bridges on site3
D. the inter-switch link (ISL) between sit el and site3
Answer: D
Microsoft SQL Server is being hosted from a Microsoft Hyper-V cluster and is mounting a LUIM from NetApp storage that contains its working databases. In this scenario, which product would be used to ensure that consistent Snapshot copies of the database are obtained?
A. Snap Manager for MS Exchange
B. Snap Manager for Virtual Infrastructure
C. Snap Manager For SQL server
D. Snap Manager for Hyper-V
Answer: C
You will be surprised, because its daily purchase rate is the highest. Do not miss it, and add to your shoppingcart quickly. Certpark provides a clear and superior solutions for each Network Appliance NS0-191 exam candidates. We provide you with the NetApp Certified Support Engineer (NCSE) NS0-191 dumps. Our team of IT experts is the most experienced and qualified. Our NetApp Certified Support Engineer (NCSE) NS0-191 dumps are almost like the real exam. This is really amazing.
When you choose our help, Certpark can not only give you the accurate and comprehensive NetApp Certified Support Engineer (NCSE) NS0-191 dumps, but also give you a year free update service.We should use the most relaxed attitude to face all difficulties. Although Network Appliance NS0-191 exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because Certpark NetApp Certified Support Engineer (NCSE) NS0-191 dumps will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. Certpark NetApp Certified Support Engineer (NCSE) NS0-191 dumps are the best medicine for candidates.You have seen Certpark NetApp Certified Support Engineer (NCSE) NS0-191 dumps, it is time to make a choice. You can choose other products, but you have to know that Certpark can bring you infinite interests.
No comments:
Post a Comment